HEBEI ZHENGDING FOREIGN TRADE CORP.
	Hua An Road, Zhengding, Shijiazhuang, P. R. China
	Tel.:+86-311-87811183 and 88022526 Fax:+86-311-87813751
	e-mail:bfeng@heinfo.net and watereau@sohu.com

1)YZ-600II Camera Film and YZ-800 Camera Film

Application:
YZ-600II Camera Film is designed for line, black and white halftone and contact work in printing, textile printing and electronic industries, etc. This film is good in quality, easy to operate. It is an ideal camera film.
Characteristics:
-An extra hard orthochromatic film.
-High maximum densisty, low fog densisty, suitable for the requirements of contact work.
_High contrast, high resolution and excellent dot sharpness.
-Wide exposure and developing latitude.
-various processing chemicals could be used. It is suitable for both machine processing at high, medium and mornal temperature.
-It features high dot etchability.
The base is a flat and dimensionally stable specially made polyester base. An accurate quality of make-up could be obtained.
Safelighting: Dark-red light.
Spectral sensitive:
Relative sensitivity
Photographic properties:
-Light source color temperature 2856K
-Fog density D0≤0.04; Max. densisty Dmax≥4.0; Contrast coefficient γ ≥8.0 (γ ≥9.0 for YZ-800)
Processing:
-Munual
Developer formular	D-11 20±0.5℃ 3-5min
Fixer formular	F-5 21±1℃ 5min
-Machine
Recommended chemicals	HG-9110
Chemicals could be used	KY-3000
Procedure
Developing 28-23℃(temp.) and 90-60s(time)
Fixing 20-35℃(temp.) and 90-30s(time)
Drying 45-50℃
Package:
In box 500mm X 600mm X 50sheets/box
In roll 0.6m X 30m/roll; 0.6m X 60m/roll; 1.2m X 30m/roll. Other sizes are also available as required.
Storage:
-Store cool and dry. Storage temperature is not higher than 20℃, RH not higher than 65%. Storage under warm and/or humid conditions may shorten the product's shelf-life.
-Avoid storaging it in the same room with radioactive or harmful substances.
-Keep the film in the original package. Unpack under safelight. Use that up as soon as possible after unpacking. The left film should be repacked with the original materials.
-Handle with care. Avoid friction and fold. Never contaminate the film with finger prints or grease.
Guarentee Peroid:
15 months according to the storage conditions.

2)YZ-1000 Camera Film

Application:
YZ-1000 Camera Film is designed for line, black and white halftone and contact work in printing, textile printing and electronic industries, etc. This film is good in quality, easy to operate. It is an ideal camera film.
Characteristics:
-An extra hard orthochromatic film.
-High maximum densisty, low fog densisty, suitable for the requirements of contact work.
_High contrast, high resolution and excellent dot sharpness.
-Wide exposure and developing latitude.
-Using HG-1000 processing chemicals, it is able to get the effect of ultra-high contrast, short toe and excellent dot sharpness.
-Using other processing chemicals, the effect of YZ-600II and YZ-800 camera films could be obtained.
-It has a short toe of characteristic curve.
-The base is a flat and dimensionally stable specially made polyester base. An accurate quality of make-up could be obtained.
Safelighting:-High maximum densisty, low fog densisty,
Spectral sensitive:
Relative sensitivity
Photographic properties:
-Light source color temperature 2856K
-Fog density D0≤0.04; Max. densisty Dmax≥4.0; Contrast coefficient γ ≥10.0
Processing:
-Munual
Developer formular	D-11 20±0.5℃ 3-5min
Fixer formular	F-5 21±1℃ 5min
-Machine
Recommended chemicals	HG-9110
Chemicals could be used	KY-3000
-Procedure
Developing 28-23℃(temp.) and 90-60s(time)
Fixing 20-35℃(temp.) and 90-30s(time)
Drying 45-50℃
Package:
In box 500mm X 600mm X 50sheets/box
In roll 0.6m X 30m/roll; 0.6m X 60m/roll; 1.2m X 30m/roll. Other sizes are also available as required.
Storage:
-Store cool and dry. Storage temperature is not higher than 20℃, RH not higher than 65%. Storage under warm and/or humid conditions may shorten the product's shelf-life.
-Avoid storaging it in the same room with radioactive or harmful substances.
-Keep the film in the original package. Unpack under safelight. Use that up as soon as possible after unpacking. The left film should be repacked with the original materials.
-Handle with care. Avoid friction and fold. Never contaminate the film with finger prints or grease.
Guarentee Peroid:
15 months according to the storage conditions.

3)GLR-II Roomlight Film

Application:
GLR-II Roomlight Contact Film is designed for contact work and it can be operate safely under roomlight condition. The exposure light source is xenon lamp and/or iodine-gallium lamp, etc. that contains UV light. It is suitable for contact work under roomlight in printing, textile printing and electronic industries, etc. The product offers high contrast, short toe and safe under roomlight, high temperature. It is good in quality, easy to operate under roomlight. Therefore it is a most ideal new generation of roomlight film.
Charactericstics:
-An extra hard roomlight contact film sensitive to UV light.
-High maximum densisty, low fog densisty, and safe under roomlight.
-High contrast, short toe, high resolution and excellent dot sharpness.
-Wide exposure and developing latitude.
-Various chemicals for rapid access processing at high temperature can be used. It is suitable for both machine and manual processing at high, medium and normal temperature.
The fase is a dementionally stable polyester base. An accurate quality of make-up bold be obtained.
Safelighting: Incandescent Lamp
Spectral sensitive:
Relative sensitivty
Photographic properties:
-Light source of exposure, Ultraviolet light
-Light source color tem. 5400K
-Fog density D0≤0.04; Max. densisty Dmax≥4.0; Contrast coefficient γ ≥10.0
Safety under roomlight:
Irrediating 60 with 100W incandescent lamp at a distance of 2 meters, Fog Density ≥4.0
-Manual:
Developer formular	D-11 20±0.5℃ 3-5min
Fixer formular	F-5 21±1℃ 5min
-Machine:
Recommended chemicals	HG-9110
Chemicals could be used	KY-3000
-Procedure
Developing 28-23℃(temp.) and 90-60s(time)
Fixing 20-35℃(temp.) and 90-30s(time)
Drying 45-50℃
-Package:
In box 500mm X 600mm X 50sheets/box
In roll 0.6m X 30m/roll; 0.6m X 60m/roll; 1.2m X 30m/roll. Other sizes are also available as required.
Storage:
-Store cool and dry. Storage temperature is not higher than 20℃, RH not higher than 65%. Storage under warm and/or humid conditions may shorten the product's shelf-life.
-Avoid storaging it in the same room with radioactive or harmful substances.
-Keep the film in the original package. Unpack under safelight. Use that up as soon as possible after unpacking. The left film should be repacked with the original materials.
-Handle with care. Avoid friction and fold. Never contaminate the film with finger prints or grease.
Guarentee Peroid:
15 months according to the storage conditions.

4)GL-I Ortho Film

Application:
Gl-I Orho Film is designed for contact film in printing, textile printing and electronic industries. This film is good in quality, easy to operate and reasonable in price. It is a good ortho film.
Characteristics:
-An extra hard orthochromatice film.
-Suitable for contact work.
-High contrast.
-Wide exposure and developing latitude.
-Various processing chemicals can be used, suitable for both machine and manual processing at medium and normal tempareture.
-The base is a flat and dimensionally stable polyster base.
Safelighting: Dark red light
Spectral sensivity
Photographic properties:
-Fog density D0≤0.06; Max. densisty Dmax≥3.5; Contrast coefficient γ ≥6.0
Processing:
Developer Formula	D-11 20±0.5℃ 3-5min
Fixer formular	F-5 21±1℃ 5min
-Machine:
Recommended chemicals	HG-9110
Chemicals could be used	KY-3000 etc.
-Package:
Developing 28-23℃(temp.) and 90-60s(time)
Fixing 20-35℃(temp.) and 90-30s(time)
Drying 45-50℃
-Package:
In box 500mm X 600mm X 50sheets/box, Other sizes are also available as required.
Storage:
-Store cool and dry. Storage temperature is not higher than 20℃, RH not higher than 65%. Storage under warm and/or humid conditions may shorten the product's shelf-life.
-Avoid storaging it in the same room with radioactive or harmful substances.
-Keep the film in the original package. Unpack under safelight. Use that up as soon as possible after unpacking. The left film should be repacked with the original materials.
-Handle with care. Avoid friction and fold. Never contaminate the film with finger prints or grease.
Guarentee Peroid:
15 months according to the storage conditions.